Effects

6-slot serial FX chain processing the final mixed output. Each slot: 1 of 17 effect types or empty.

FX Chain Signal Flow

Line Mixer Output -> Slot 1 -> Slot 2 -> Slot 3 -> Slot 4 -> Slot 5 -> Slot 6 -> DAC Color -> Soft Clip -> Master Out

All 17 Effect Types

  1. Chorus — A modulated time-delay effect that thickens and widens the sound by layering detuned copies. Parameters: Rate (0.1-10 Hz), Depth (0-5), Mix, Programs
  2. Delay — Echoes the input with adjustable feedback, digital or tape mode, and tape warmth. Parameters: Time (0.01-2.0s), Feedback (0-99%), Mix, Mode (Digital/Tape), Warmth
  3. Reverb — Simulates acoustic spaces from small rooms to large halls with adjustable character and pre-delay. Parameters: Mix, Space (0-100%), Pre (0-100ms), Dist, Char, Programs
  4. Phaser — Sweeps phase-cancellation notches through the frequency spectrum for a swirling, whooshing motion. Parameters: Rate (0.1-10 Hz), Depth, Feedback (-90% to +90%), Mix
  5. Vibrato — Modulates pitch cyclically using LFO waveforms with an adjustable onset delay. Parameters: Wave (Tri/Saw/InvSaw/Sq), Rate (1-200), Depth (0-50), Delay (0-5000ms)
  6. Phase Mod — Phase modulation synthesis inside the FX chain for complex spectral movement. Parameters: Amount (0-50%), Ratio (0.5-8.0), Pre (On/Off)
  7. Compressor — Smooths dynamic range with full control over threshold, ratio, attack, release, and makeup gain. Parameters: Threshold (-60 to 0 dB), Ratio (1:1 to 20:1), Attack (0.1-200ms), Release (10-2000ms), Makeup (0-24dB), Mix
  8. 8-Band EQ — Eight bands (64–8000 Hz) for precise tone shaping with ±12 dB per band. Band 1 is a low-pass filter, bands 2-7 are peaking, and band 8 is a high-pass filter. Parameters: 64, 125, 250, 500, 1k, 2k, 4k, 8k bands; -12 to +12 dB each
  9. Grain Delay — Granular delay that chops the audio into grains for glitchy, textured, and atmospheric echoes. Parameters: Time (0.01-1.0s), Feedback, Scatter, Density, Mix
  10. Bitcrusher — Reduces bit depth and sample rate for digital lo-fi crunch and aliasing artefacts. Parameters: Bits (1-16), Rate (1-32x), Mix
  11. Shimmer Verb — Reverb with a pitch-shifted feedback path that produces ethereal, shimmering tails. Parameters: Shimmer (0-100%), Space (0-100%), Mix
  12. Distortion — Overdrive, distortion, and fuzz types for everything from warm saturation to aggressive clipping. Parameters: Type (OD/Dist/Fuzz), Drive, Tone, Mix
  13. Juno Chorus — Emulates the classic Roland Juno chorus circuit. Modes I, II, and I+II offer different stereo width and movement. Parameters: Mode (I/II/I+II), Mix
  14. Ring Mod — Amplitude modulation between the signal and an internal oscillator for metallic, bell-like, and inharmonic tones. Parameters: Freq (20-4000 Hz), Mix
WARNING

Ring Mod works but its behaviour may change slightly in future updates.

FX Chain Tips

TIP
  • Bass: Compressor -> EQ -> Distortion (light)
  • Lead: Distortion -> Delay -> Reverb
  • Pad: EQ -> Chorus -> Reverb -> Shimmer Verb
  • Experimental: Bitcrusher -> Grain Delay -> Ring Mod -> Wavefolder

Next: Global Controls | Presets | Previous: Modulation